How to deal with the hydraulic system heating phenomenon in the operation of the bending machine?

While the heating of the motor during the operation of the bending machine does not usually affect its service life, most customers should not ignore it and will burn out the motor in serious cases.Determine whether the bending equipment motor can burn out the first smell, open the junction box, remove the end joint, and the general meter measures whether the three phases can short circuit.Inter-turn short circuit using bridge test, measure the ground resistance; touch the temperature of motor is very high.

When the hydraulic system of the pipe bending machine leaks, it can reduce the number of oil pipe joints to avoid leakage, reduce the hydraulic impact and mechanical vibration, extend the change time, regular inspection, regular maintenance, timely treatment, and avoid leakage. Pipe bending machine in the work sometimes occurs in the hydraulic system heating phenomenon, the internal reason is that the system design is not reasonable, such as unreasonable component matching, the pipeline channel is too thin.

The bending radius is small, the tank volume is insufficient, the external reason is the improper amount of hydraulic system.

1. The pipe bending machine chooses touch display and CNC machine control module, the procedure is easy to set;

2. The bed body structure is stable and not easy to deform;

3. Each gear can be set with 16 corners, and the memory body can store 16 groups of files; 4. The pipe bending machine has slow positioning function, stable bending Angle, and repetition accuracy of ± 0.1°;

5. Display the error information on the screen to help the operators to eliminate it immediately; 6. Provide self-developed seat conversion bending processing value, software can be purchased and installed on the desktop editing calculation